Armored Thermocouple

  • Movable Adjustable Flange Armored Thermocouple
  • Movable Adjustable Flange Armored Thermocouple
Movable Adjustable Flange Armored ThermocoupleMovable Adjustable Flange Armored Thermocouple

Movable Adjustable Flange Armored Thermocouple

  • Movable Adjustable Flange Armored Thermocouple
  • Product description: Industrial use waterproof flange armored thermocouple directly measures the temperature of liquid vapor and gaseous media from 0 ° C to 1300 ° C in various productions.
  • INQUIRY

Movable Adjustable Flange Armored Thermocouple are suitable for containers and pipes. Can be equipped with DIN EN or ASME standard flanges. This temperature sensor is suitable for other and liquid media under moderate mechanical loads. The jacket is in a fully welded version and is threaded to the junction box. The stainless steel jacket can be used in normal chemical conditions. Coated sleeves are recommended for chemical corrosion and wear-resistant coatings are recommended for grinding media. Applications: Experimental equipment, industrial furnaces, heating boilers, heating equipment, electricity, chemicals. Protective sleeve: stainless steel 304, optional 316, wear protection and so on.

Movable Adjustable Flange Armored Thermocouple

We may provide other flange as users demand,please contact us about Movable Adjustable Flange Armored Thermocouple.

Movable Adjustable Flange Armored Thermocouple

category

    Code
   Index number
Casing outer diameter mm
Common temperature °C
High operating temperature °C
Allowable deviation
Measuring range °C
Allowable difference
Platinum rhodium 10-platinum
WRPK
S
≥Φ3
1100
1200
0-1200
±1.5°C or ±1.5%t
Nickel-chromium-copper-nickel
WREK
E
≥Φ3
600
700
0-700
±2.5°C or ±0.75%t
Nickel-chromium-nickel silicon
WRNK
K
≥Φ3
800
950
0-900
±2.5°C or ±0.75%t
Copper-copper nickel
WRCK
T
≥Φ3
350
400
Less than -200(-40-350)

Unspecified
±0.75%t
Iron-copper nickel
WRFK
J
≥Φ3
800
600
0-600
±2.5°C or ±0.75%t

Thermocouple flange mounting problem summary:

 thermocouple is required to be installed with a fixed point, ie a mounting boss. If the boss can be soldered directly to the device, no flange mounting is required;
Because the inner diameter of the neck of the boss is not large, it is thinner. If the neck of the boss is not too long, (for example, it will block, it is easy to break, and the bent thermocouple is not easy to pull out), then a thicker is needed. The neck. Or the device can only provide a flange opening for manufacturing reasons. This will be flange mounted.
There are roughly three cases of flange mounting:
Mounting the boss on the flange and screwing the thermocouple;
The boss is mounted on the flange, and the thermocouple is connected by a ferrule;
Solder the thermocouple directly to the flange.
The first two are called the movable flange installation. It is not necessary to remove the flange when disassembling and adjusting; the latter is called the fixed flange installation, and the flange needs to be removed when disassembling. Therefore, the installation form is suitable for the easy-to-assemble flange, that is, the pressure is not high, and there is no material corrosion or splashing.

Scan the qr codeClose
the qr code