Boiler Specific Thermocouple

  • Special Wear resistant thermocouple for garbage power plant incinerator
Special Wear resistant thermocouple for garbage power plant incinerator

Special Wear resistant thermocouple for garbage power plant incinerator

  • Special thermocouple for garbage power plant incinerator
  • Product description: At the same time, there are also particulate matter, etc., then you need Special Wear resistant thermocouple for garbage power plant incinerator.
  • INQUIRY
     In a waste-to-energy plant incinerator, 10 million tons of garbage is burned every day while providing heat to the power generation. At the same time, the temperature of the incinerator is also a very important temperature. At this time, the thermocouple is required to measure the high temperature, but the garbage itself is corrosive. At the same time, there are also particulate matter, etc., then you need Special Wear resistant thermocouple for garbage power plant incinerator.
     Generally, the most used type of waste incinerator is the K-type thermocouple, because the k-type thermocouple material is cheap, the temperature is high, the precision is high, and the temperature measurement environment is complicated, the corrosive gas is present, and the solid particles are not completely burned. These are huge challenges for thermocouples. The use of wear-resistant thermocouples improves the life of thermocouples in this environment. For example, the thermocouple of 1 meter is deeply inserted. At this time, the length of the wear head is 400mm, and the remaining 600mm is made of 2520 stainless steel. The two are welded together. The domestic brand good thermocouple is selected, and the life can be up to 10 months. It is a tungsten-cobalt alloy containing rare earths. Our Tiankang performance and feedback in this regard are very good.
The thermocouple parameters we normally choose according to customer requirements are as follows: thermocouple, wrn-431, bushing 25mm, K indexing, insulation type, 2520 stainless steel, seismic wear head 400mm, tungsten cobalt alloy, total length 950mm, depth 800mm, Flange DN40-PN10 FF GB/T 9119-2010, first grade, inner armored wire 6mm, nickel septum - nickel silicon diameter 0.9mm, such thermocouple is not expensive, and its life in the incinerator is greatly extended.
     In terms of thermocouple selection or material selection, we welcome to communicate with us. We have a wealth of experience and a wide range of options. Welcome to communicate.

Scan the qr codeClose
the qr code